P08302
GE Anesthesia Machine Oxygen Cell
Installed in the inspiratory circuit to measure FiO2; compatible with the entire Aespire,…
P08301
Maquet Permanent Oxygen Cell
Compatible with Servo-i / Servo-s, also called an "ultrasonic oxygen sensor". Principle: …
P08300
Maquet Ventilator Circuit Support Arm / Articulated Arm
Circuit support arm for the Maquet Servo-i / Servo-s, used to hold the patient breathing …
P08299
Maquet Pressure Board 1774
Pressure sensor board for the Maquet Servo-i ventilator; PC1774 pressure sensor board, on…
P08298
Maquet Air/O2 Gas Module
Air/O2 gas module for the Maquet Servo-i ventilator; the same module as 6671135 under a d…
P08297
Maquet Maintenance Kit
Maquet (formerly Siemens Maquet) Servo-i / Servo-s ventilator 5000-hour maintenance kit; …
P08296
Maquet Battery
12 V backup battery module for the Servo series ventilators; compatible with Servo-i / Se…
P08295
Maquet Expiratory Cassette Connector
Water trap (Moisture Trap) for the Servo-i / Servo-s expiratory cassette; clips below the…
P08294
Maquet Flow Sensor Expiratory Cassette
Expiratory cassette for Servo-i / Servo-s ventilators with a built-in ultrasonic flow sen…
P08293
Maquet Oxygen Sensor / Oxygen Cell
Original oxygen cell for Servo-i / Servo-s ventilators; electrochemical principle, measur…
P08292
Covidien E360 Flow Sensor
Accuracy: 0.2 + 3%; flow range: 1–150 cm/s (water equivalent); supply: 24 V ±20% DC, with…
P08291
Covidien PB980 Battery
Original lithium-ion backup battery for the ventilator, 25.9 V / 4.3 Ah, installed in the…
P08289
Covidien PB980 Expiratory-End Filter and Water Trap
10053033 is the expiratory-end filter for the PB980, and 10063031 is the water trap below…
P08288
Covidien PB840 Flow Sensor
The PB840 has three built-in crystal hot-film flow sensors: Q1 measures oxygen, Q2 measur…
P08287
Covidien PB Inspiratory-End Filter
Reusable inspiratory-end bacterial filter, installed on the inspiratory circuit to retain…
P08286
Covidien PB840 Expiratory-End Filter
Original reusable expiratory-end bacterial filter for the PB840 ventilator, installed in …
P08285
Covidien PB840 Water Trap
Water trap for the expiratory-end filter of the PB840 ventilator, installed in series bel…
P08284
Dräger Anesthesia Machine Breathing Bag
The breathing bag is the reservoir bag in the anesthesia machine breathing circuit — it s…
P08283
Dräger Fabius Anesthesia Machine Breathing Module Connector (Circuit Platform Interface)
Also called the Elbow Fitting Assembly, this is a key adapter on the COSY breathing circu…
P08282
Dräger Anesthesia Machine Vacuum Pump Filter
Used in anesthesia and respiratory machines to filter particulate contaminants from the a…
P08281
Dräger Anesthesia Machine Bellows Diaphragm
2600650 is the diaphragm vent cup; 2600651 is the diaphragm piston assembly. 2600650 vent…
P08280
Dräger CO2 Water Trap
WaterLock® 2 water trap, mounted on the sidestream CO2 sampling line to intercept condens…
P08279
Dräger Fabius Anesthesia Machine Oxygen Cell Cable with Sensor Housing
Compatible models: Fabius Tiro, Fabius Plus, Fabius OS, Fabius GS, and the Narkomed serie…